Home » Posts filed under Henrik
D. Ko, H. Kim, H. Lee,
C. T. Yavuz, H. R. Andersen, Y. Hwang*
J. Environ. Chem. Eng., 6, 4124–4129 (2018).
DOI:
10.1016/j.jece.2018.06.007
Stormwater runoff derived from airports causes severe cadmium contamination in excess of the maximum limit level and is difficult to treat due to the irregular contamination levels from scattered rainfall. To overcome this and remove cadmium from runoff, a new reactive filtration column is introduced. Sulfur functionalized polymer particles were successfully embedded onto the surface of alginate bead (DiS-algi) and simulated a real stormwater treatment filtration column. The DiS-algi shows 22.3 mg/g of batch and 877 μg/g of continuous flow sorption capacity. Also, the results for the new sorption material show that within 6 mins half of the cadmium was removed with 31 L/mg of Langmuir sorption affinity, outperforming an activated carbon filter. From a breakthrough test the reactive column shows complete uptake of cadmium from a contaminated flow, lasting two hours until reaching the breakthrough point. Furthermore, regeneration tests of the column verified its reusability. DiS-algi appears to be a viable new cadmium sorption material for airport derived stormwater runoff filtration systems.
D. Ko*, P. D. Mines, M. H. Jakobsen,
C. T. Yavuz, H. C. B. Hansen, H. R. Andersen
Chem. Eng. J., 348, 685–692 (2018).
DOI:
10.1016/j.cej.2018.04.192
The emerging concern of heavy metal pollution derived from stormwater runoff has triggered a demand for effective heavy metal sorbents. To be an effective sorbent, high affinity along with rapid sorption kinetics for environmental relevant concentrations of heavy metals is important. Herein, we have introduced a new composite suitable for trace metal concentration removal, which consists of cheap and common granular activated carbon covered with polymers containing soft bases, thiols, through acyl chlorination (DiS-AC). Material characterization demonstrated that the polymer was successfully grafted and grown onto the surface of the carbon substrate. The distribution coefficient for Cd2+ bonding was 89·103 L/kg at a solution concentration of 0.35 mg/L, which is notably higher than sorption affinities for Cd2+ seen in conventional sorbents. The sorption isotherm is well described by the Freundlich isotherm and within an hour, half of the initial trace (0.2 mg/L) concentration of Cd2+ was removed by the DiS-AC at a sorbent loading of 2 g/L. Therefore, the novel material DiS-AC promises to be an ideal candidate for filters treating stormwater runoff.
P. D. Mines, B. Uthuppu,
D. Thirion, M. H. Jakobsen,
C. T. Yavuz, H. R. Andersen, Y. Hwang*
Chem. Eng. J., 339, 22-31 (2018).
DOI: 10.1016/j.cej.2018.01.102
Granular activated carbon was customized with a chemical grafting procedure of a nanoporous polymeric network for the purpose of nanoscale zero-valent iron impregnation and subsequent water contaminant remediation. Characterization of the prepared composite material revealed that not only was the polymer attachment and iron impregnation successful, but also that the polymeric shell acted as a protective barrier against the effects of oxidation from the surrounding environment, nearly 99% of total iron content was in the form of zero-valent iron. When applied towards the remediation of two common water contaminants, nitrobenzene and nitrate, the composite material exploited the qualities of both the activated carbon and the polymeric network to work together in a synergistic manner. In that the increased protection from oxidation allowed for increased reactivity of the nanoscale zero-valent iron, and that the adsorption abilities of both the carbon and the polymer achieved a higher amount of total removal of the contaminants.
D. Ko,
J. S. Lee,
H. A. Patel, M. H. Jakobsen, Y. Hwang,
C. T. Yavuz, H. C. B. Hansen, H. R. Andersen*
J. Hazard. Mater., 332, 140–148, (2017).
DOI:
10.1016/j.jhazmat.2017.03.007.
Heavy metal contaminated surface water is one of the oldest pollution problems, which is critical to ecosystems and human health. We devised disulfide linked polymer networks and employed as a sorbent for removing heavy metal ions from contaminated water. Although the polymer network material has a moderate surface area, it demonstrated cadmium removal efficiency equivalent to highly porous activated carbon while it showed 16 times faster sorption kinetics compared to activated carbon, owing to the high affinity of cadmium towards disulfide and thiol functionality in the polymer network. The metal sorption mechanism on polymer network was studied by sorption kinetics, effect of pH, and metal complexation. We observed that the metal ions–copper, cadmium, and zinc showed high binding affinity in polymer network, even in the presence of competing cations like calcium in water.
P. D. Mines*,
D. Thirion, B. Uthuppu, Y. Hwang, M. H. Jakobsen, H. R. Andersen,
C. T. Yavuz*
Chem. Eng. J., 309, 766-771, (2017). DOI:
10.1016/j.cej.2016.10.085.
Nanoporous networks of covalent organic polymers (COPs) are successfully grafted on the surfaces of activated carbons, through a series of surface modification techniques, including acyl chloride formation by thionyl chloride. Hybrid composites of activated carbon functionalized with COPs exhibit a core-shell formation of COP material grafted to the outer layers of activated carbon. This general method brings features of both COPs and porous carbons together for target-specific environmental remediation applications, which was corroborated with successful adsorption tests for organic dyes and metals.
P. D. Mines,
J. Byun, Y. Hwang,
H. A. Patel, H. R. Andersen,
C. T. Yavuz*
J. Mater. Chem. A, 4, 632-639 (2016). DOI:
10.1039/C5TA05025A.
Nanoscale zero-valent iron (nZVI), with its reductive potentials and wide availability, offers degradative remediation of environmental contaminants. Rapid aggregation and deactivation hinder its application in real-life conditions. Here, we show that by caging nZVI into the micropores of porous networks, in particular Covalent Organic Polymers (COPs), we dramatically improved its stability and adsorption capacity, while still maintaining its reactivity. We probed the nZVI activity by monitoring azo bond reduction and Fenton type degradation of the naphthol blue black azo dye. We found that depending on the wettability of the host COP, the adsorption kinetics and dye degradation capacities changed. The hierarchical porous network of the COP structures enhanced the transport by temporarily holding azo dyes giving enough time and contact for the nZVI to act to break them. nZVI was also found to be more protected from the oxidative conditions since access is gated by the pore openings of COPs.
