High-capacity methane storage in flexible alkane-linked porous aromatic network polymers

V. Rozyyev, D. Thirion, R. Ullah, J. Lee, M. Jung, H. Oh, M. Atilhan*, C. T. Yavuz*
Nat. Energy, 4, 604-611, (2019).
DOI: 10.1038/s41560-019-0427-x
Readcube link to read for free

Adsorbed natural gas (ANG) technology is a viable alternative to conventional liquefied or compressed natural-gas storage. Many different porous materials have been considered for adsorptive, reversible methane storage, but fall short of the US Department of Energy targets (0.5 g g−1, 263 l l−1). Here we prepare a flexible porous polymer, made from benzene and 1,2-dichloroethane in kilogram batches, that has a high methane working capacity of 0.625 g g−1 and 294 l l−1 when cycled between 5 and 100 bar pressure. We suggest that the flexibility provides rapid desorption and thermal management, while the hydrophobicity and the nature of the covalently bonded framework allow the material to tolerate harsh conditions. The polymer also shows an adsorbate memory effect, where a less adsorptive gas (N2) follows the isotherm profile of a high-capacity adsorbate (CO2), which is attributed to the thermal expansion caused by the adsorption enthalpy. The high methane capacity and memory effect make flexible porous polymers promising candidates for ANG technology.
[Continue reading...]

A combined experimental and theoretical study on gas adsorption performance of amine and amide porous polymers

R. Ullah, H. A. Patel, S. Aparicio, C. T. Yavuz*, M. Atilhan*
Micropor. Mesopor. Mater., 279, 61-72 (2019).
DOI: 10.1016/j.micromeso.2018.12.011

In this manuscript, we report synthesis, characterization and application of amine and amide type covalent organic frameworks as CO2 adsorbent materials at various isotherms and wide pressure conditions. Furthermore, we also report a detailed density functional theory investigation of the studied adsorbents in order to explain their adsorption behaviors and provide comparisons with experimental results. The objective of this work was to investigate custom design porous polymers by building amine and amide functionalities in the final structures, whether they have efficient CO2 capturing performances at wide process conditions that covers both low and high pressure end applications to cover either pre- or post-combustion processes. On the other hand, energy storage performances of these materials were tested by performing H2 sorption experiments as well. Two porous polymers, namely COP-9 and COP-10, were characterized with BET, TGA and FTIR to evaluate the physical properties of studied porous polymers and then were tested for CO2, N2 and H2 adsorption both at low and high pressures. Studied materials were found to have compelling adsorption capacity mostly at high pressures and have very good selectivity for CO2/N2 and CO2/H2 respectively.
[Continue reading...]

Structural Elucidation of Covalent Organic Polymers (COP) and Their Linker Effect on Gas Adsorption Performance via Density Functional Theory Approach

S. Aparicio*, C. T. Yavuz, M. Atilhan*
ChemistrySelect, 3, 8294– 8305 (2018).
DOI: 10.1002/slct.201801849

Investigation of the binding affinity gases on porous adsorbents are important for establishing understanding of effective carbon dioxide adsorption and design target specific sorbents for capturing hazardous gases for environmental protection and fuel upgrading. A Density Functional Theory (DFT) study that highlights the impact of covalent organic polymer (COP) design has been conducted to explain the molecular and electronic structure, investigate the interaction sites and elucidate the experimental findings on carbon dioxide (CO2) and nitrogen (N2) sorption on these porous structures. DFT calculations were used to infer the details of the type and the strength of the polymer – gas interaction modes at various interaction sites as well as to quantify short‐range interactions between the polymer – gas via topological characteristics analysis of intermolecular forces. Results obtained in this study were used to shed light on CO2 and N2 affinity of the studied polymer structures; interpretations regarding to the macroscopic behaviors were discussed and conclusions were attained on the characteristics of the adsorption type and mechanism.
[Continue reading...]

Molecular Insights into Benzimidazole-linked Polymer Interactions with Carbon Dioxide and Nitrogen

S. Aparicio*, C. T. Yavuz, M. Atilhan*
ChemistrySelect, 3, 3691 – 3701 (2018).
DOI: 10.1002/slct.201800253

Investigation of the binding affinity gases on porous adsorbents are important for establishing understanding of effective carbon dioxide adsorption and design target specific sorbents for capturing hazardous gases for environmental protection and fuel upgrading. A density functional theory (DFT) study that highlights the impact of benzimidazole‐linked polymer structure design has been conducted to explain the molecular and electronic structure, investigate the interaction sites and elucidate the experimental results on carbon dioxide and nitrogen sorption on these porous structures. DFT calculations were used to infer the strength of the polymer – gas interaction modes as well as to quantify short‐range interactions between the polymer – gas via topological characteristics analysis of intermolecular forces. Obtained results shed light on the carbon dioxide and nitrogen affinity as well as the selectivity during the adsorption process, and yet conclusions were attained on the characteristics of the adsorption type and mechanism in this study.
[Continue reading...]

Investigation of Ester- and Amide-Linker-Based Porous Organic Polymers for Carbon Dioxide Capture and Separation at Wide Temperatures and Pressures

R. Ullah§, M. Atilhan*, B. Anaya, S. Al-Muhtaseb, S. Aparicio, H. A. Patel§, D. Thirion, C. T. Yavuz*
ACS Appl. Mater. Interfaces , 8 (32), 20772–20785, (2016). §: Equal contribution. DOI: 10.1021/acsami.6b05927.
Organic compounds, such as covalent organic framework, metal–organic frameworks, and covalent organic polymers have been under investigation to replace the well-known amine-based solvent sorption technology of CO2 and introduce the most efficient and economical material for CO2 capture and storage. Various organic polymers having different function groups have been under investigation both for low and high pressure CO2 capture. However, search for a promising material to overcome the issues of lower selectivity, less capturing capacity, lower mass transfer coefficient and instability in materials performance at high pressure and various temperatures is still ongoing process. Herein, we report synthesis of six covalent organic polymers (COPs) and their CO2, N2, and CH4 adsorption performances at low and high pressures up to 200 bar. All the presented COPs materials were characterized by using elemental analysis method, Fourier transform infrared spectroscopy (FTIR) and solid state nuclear magnetic resonance (NMR) spectroscopy techniques. Physical properties of the materials such as surface areas, pore volume and pore size were determined through BET analysis at 77 K. All the materials were tested for CO2, CH4, and N2 adsorption using state of the art equipment, magnetic suspension balance (MSB). Results indicated that, amide based material i.e. COP-33 has the largest pore volume of 0.2 cm2/g which can capture up to the maximum of 1.44 mmol/g CO2 at room temperature and at pressure of 10 bar. However, at higher pressure of 200 bar and 308 K ester-based compound, that is, COP-35 adsorb as large as 144 mmol/g, which is the largest gas capturing capacity of any COPs material obtained so far. Importantly, single gas measurement based selectivity of COP-33 was comparatively better than all other COPs materials at all condition. Nevertheless, overall performance of COP-35 rate of adsorption and heat of adsorption has indicated that this material can be considered for further exploration as efficient and cheaply available solid sorbent material for CO2 capture and separation.
[Continue reading...]

High performance CO2 filtration and sequestration by using bromomethyl benzene linked microporous networks

R. Ullah§, M. Atilhan*, B. Anaya, S. Al-Muhtaseb, S. Aparicio, D. Thirion§, C. T. Yavuz* 
RSC Adv. , 6, 66324–66335, (2016). §: Equal contribution. DOI: 10.1039/C6RA13655A


Porous solid sorbents have been investigated for the last few decades to replace the costly amine solution and explore the most efficient and economical material for CO2 capture and storage. Covalent organic polymers (COPs) have been recently introduced as promising materials to overcome several issues associated with the solid sorbents such as thermal stability and low gas capturing capacity. Herein we report the synthesis of four COPs and their CO2, N2 and CH4 uptakes. All the presented COP materials were characterized by using an elemental analysis method, Fourier transform infrared spectroscopy (FTIR) and solid state nuclear magnetic resonance (NMR) spectroscopy techniques. The physical properties of the materials such as surface area, pore volume and pore size were determined by BET analysis at 77 K. All the materials were tested for CO2, CH4 and N2 adsorption through a volumetric method using magnetic sorption apparatus (MSA). Among the presented materials, COP-118 has the highest surface area of 473 m2 g-1 among the other four materials and has shown excellent performance by capturing 2.72 mmol g-1 of CO2, 1.002 mmol g-1 of CH4 and only 0.56 mmol g-1 of N2 at 298 K and 10 bars. However the selectivity of another material, COP-117-A, was better than that of COP-118. Nevertheless, the overall performance of the latter has indicated that this material can be considered for further exploration as an efficient and cheaply available solid sorbent compound for CO2 capture and separation.

[Continue reading...]

High-Pressure Methane, Carbon Dioxide, and Nitrogen Adsorption on Amine-Impregnated Porous Montmorillonite Nanoclays

M. Atilhan*, S. Atilhan§, R. Ullah§, B. Anayeha, T. Cagin, C. T. Yavuz, S. Aparicio*
J. Chem. Eng. Data , 61 (8), 2749–2760, (2016). §: Equal contribution. DOI: 10.1021/acs.jced.6b00134


Montmorillonite nanoclay was studied for its capability of storing carbon dioxide, methane, and nitrogen at elevated pressures. Adsorption data were collected to study and assess the possible applications of montmorillonite to gas storage, as it is available in depleted shale reservoirs. The thermodynamic properties of montmorillonite and its amine impregnated structures were studied in this manuscript. Material characterization via Brunauer–Emmett–Teller analysis, thermogravimetric analysis, Fourier transform infrared and energy dispersive X-ray spectroscopies, and scanning electron microscopy was carried out on the nanoclay samples followed by low- and high-pressure gas sorption experimental measurements via high-pressure magnetic suspension sorption apparatus at 298 and 323 K isotherms up to 50 bar. Selectivities of each gas on each nanoclay material is calculated based on single gas adsorption measurements and presented in the manuscript. Additionally, heat of adsorption and kinetics of adsorption are calculated and reported.
[Continue reading...]

Observation of wrapping mechanism in amine carbon dioxide molecular interactions on heterogeneous sorbents

D. Thirion, V. Rozyyev, J. Park, Y. Jung, M. Atilhan, C. T. Yavuz*
Phys. Chem. Chem. Phys., 18, 14177-14181, (2016). DOI: 10.1039/C6CP01382A



Liquid, solvated amine based carbon capture is the core of all commercial or planned CO2 capture operations. Despite the intense research, few have looked systematically into the nature of amine molecules and their CO2 interaction. Here, we report a systematic introduction of linear ethylene amines on the walls of highly porous Davankov type network structures through simple bromination intermediates. Surprisingly, isosteric heats of CO2 adsorption show a clear linear trend with the increase in the length of the tethered amine pendant groups, leading to a concerted cooperative binding with additional H-bonding contributions from the unassociated secondary amines. CO2 uptake capacities multiply with the nitrogen content, up to an unprecedented four to eight times of the starting porous network under flue gas conditions. The reported procedure can be generalized to all porous media with the robust hydrocarbon framework in order to convert them into effective CO2 capture adsorbents.
[Continue reading...]

Synthesis, characterization and evaluation of porous polybenzimidazole materials for CO2 adsorption at high pressures

R. Ullah, M. Atilhan*, A. Diab, E. Deniz, S. Aparicio*, C. T. Yavuz*
Adsorption, 22 (2), 247-260 (2016). DOI: 10.1007/s10450-016-9762-4.



Porous polybenzimidazole polymers have been under investigation for high and low pressure CO2 adsorption due to the well-built stability under high pressure and at various temperatures. Pressure swing and temperature swing processes like integrated gasification combined cycle require materials which can operate efficiently at high pressure and high temperature and can remove CO2. In this manuscript we report synthesis, characterization and evaluation of two polybenzimidazole materials (PBI-1 and PBI-2), which were prepared with two different solvents and different cross-linking agents by condensation techniques. Low and high pressure CO2 sorption characteristic of both the materials were evaluated at 273 and 298 K. Thermal gravimetric analysis showed high temperature stability up to 500 °C for the studied materials. PBI-1 has shown very good performance by adsorbing 3 times more (1.8025 mmolg−1 of CO2) than PBI-2 at 0 °C and at low pressures. Despite low surface area results obtained via BET techniques, at 50 bars PBI-1 adsorbed up to 6.08 mmolg−1 of CO2. Studied materials have shown flexible behavior under applied pressure that leads to so-called “gate-opening” adsorption behavior and it makes these materials promising adsorbents of CO2 at high pressures and it is discussed in the manuscript in detail.
[Continue reading...]

Insights of CO2 Adsorption Performance of Amine Impregnated Mesoporous Silica (SBA-15) at Wide Range Pressure and Temperature Conditions

R. Ullah, M. Atilhan*, A. Canlier, S. Aparicio, C. T. Yavuz*
Int. J. Greenh. Gas Control, 43, 22-32, (2015). DOI: 10.1016/j.ijggc.2015.09.013.

Beside IGCC, efficient storage and transportation of CO2 and other gases require pressurize conditions. CO2 and other gases adsorption on solid sorbents at high pressure and various temperatures are extremely important as long as the environmental purification via gas capture and separation and gas transpiration are concern. The main objective of the present research was to investigate the effect of amine impregnation on the CO2, methane and nitrogen adsorption capacity of mesoporous silica (SBA-15). Ordered mesoporous silica (SBA-15) was prepared and modified with ammonium hydroxide solution to introduce NH2 functional groups within the pores of materials to produce modified SBA-15 (MSBA-15). The newly prepared materials were characterized with X-ray diffraction analysis, thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) analysis were performed to measure pore volume as well as the surface area of both the unmodified and modified samples. Results revealed that the crystal structures of SBA-15 were matched with that of MSBA15; yet, pore volume of the modified material was almost reduced to 50% of the pristine material indicating amine loading into the pore channels. Importantly, gas sorption capacity was investigated at 200 bars and three different temperatures of 318 K, 328 K, and 338 K by using state-of-the-art gravimetric Rubotherm® magnetic suspension sorption apparatus. Gas sorption experiments showed that modified mesoporous silica adsorbed 1.6164 mmol/g of CO2 at 1 bar which is almost double than that of 0.6462 mmol/g adsorbed by unmodified material. Quantitative selectivity of both the materials varied as CO2, CH4 and N2.
[Continue reading...]

Amidoxime Porous Polymers for CO2 Capture

S. Zulfiqar, S. Awan, F. Karadas, M. Atilhan*, C. T. Yavuz*, M. I. Sarwar*
RSC Adv.,  3 (38), 17203 - 17213, (2013). [DOI] [pdf] [WOS]



[Continue reading...]

Limitations and high pressure behavior of MOF-5 for CO2 capture

J. Y. Jung,‡ F. Karadas,‡ S. Zulfiqar,‡ E. Deniz, S. Aparicio, M. Atilhan*, C. T. Yavuz*, S. M. Han*
Phys. Chem. Chem. Phys., 15, 14319-14327, (2013). [pdf] [DOI] [WOS] (‡ Equal contribution)

[Continue reading...]

A combined computational and experimental study of high pressure and supercritical CO2 adsorption on Basolite MOFs

E. Deniz, F. Karadas, H. A. Patel, S. Aparicio*, C. T. Yavuz*, M. Atilhan*
Micropor. Mesopor. Mat., 175, 34-42 (2013). [DOI] [pdf] [WOS]




Metal organic frameworks (such as commercial Basolite®) display significant promise for CO2 capture and storage. Here, in order to monitor CO2 capture of Basolite®, we combined high pressure CO2 adsorption with high-pressure FTIR and Monte Carlo simulations. We found that Basolite® C300 show an unprecedented rise in capture capacity above 25 bars, as predicted by the DFT calculations. Adsorption isotherms were measured up to 200 bar using a state-of-the-art magnetic suspension balance, and in-situ FTIR studies as a function of pressure allowed characterizing the preferential adsorption sites, and their occupancy with increasing pressure. Monte Carlo molecular simulations were used to infer nanoscopic information of the adsorption mechanism, showing the sorbent–CO2 interactions from structural and energetic viewpoints.


Click here to access via the publisher

[Continue reading...]

Highly Stable Nanoporous Sulfur bridged Covalent Organic Polymers for Carbon Dioxide Removal

H. A. Patel, F. Karadas, J. Byun, J. Park, E. Deniz, A. Canlier, Y. Jung,* M. Atilhan*, C. T. Yavuz*
Adv. Funct. Mater., 23, 2270–2276 (2013). [DOI] [pdf]
Carbon dioxide capture and separation requires robust solids that can stand harsh environments where a hot mixture of gases is often found. Herein, the first and comprehensive syntheses of porous sulfur-bridged covalent organic polymers (COPs) and their application for carbon dioxide capture in warm conditions and a wide range of pressures (0–200 bar) are reported. These COPs can store up to 3294 mg g−1 of carbon dioxide at 318 K and 200 bar while being highly stable against heating up to 400 °C. The carbon dioxide capacity of the COPs is also not hindered upon boiling in water for at least one week. Physisorptive binding is prevalent with isosteric heat of adsorptions around 24 kJ mol−1. M06–2X and RIMP2 calculations yield the same relative trend of binding energies, where, interestingly, the dimer of triazine and benzene play a cooperative role for a stronger binding of CO2 (19.2 kJ mol−1) as compared to a separate binding with triazine (13.3 kJ mol−1) or benzene (11.8 kJ mol−1).

Click here for the supporting information
[Continue reading...]

High Pressure CO2 Absorption Studies on Imidazolium Based Ionic Liquids: Experimental and Simulation Approaches

F. Karadas, B. Köz, J. Jacquemin, E. Deniz, D. Rooney, J. Thompson, C. T. Yavuz, M. Khraisheh, S. Aparicio*, M. Atihan*
Fluid Phase Equilibria, 351, 74–86 (2013). [DOI] [pdf]

A combined experimental–computational study on the CO2 absorption on 1-butyl-3-methylimidazolium hexafluophosphate, 1-ethyl-3-methylimidazolium bis[trifluoromethylsulfonyl]imide, and 1-butyl-3-methylimidazolium bis[trifluoromethylsulfonyl]imide ionic liquids is reported. The reported results allowed to infer a detailed nanoscopic vision of the absorption phenomena as a function of pressure and temperature. Absorption isotherms were measured at 318 and 338 K for pressures up to 20 MPa for ultrapure samples using a state-of-the-art magnetic suspension densimeter, for which measurement procedures are developed. A remarkable swelling effect upon CO2 absorption was observed for pressures higher than 10 MPa, which was corrected using a method based on experimental volumetric data. The experimental data reported in this work are in good agreement with available literature isotherms. Soave–Redlich–Kwong and Peng–Robinson equations of state coupled with bi-parametric van der Waals mixing rule were used for successful correlations of experimental high pressure absorption data. Molecular dynamics results allowed to infer structural, energetic and dynamic properties of the studied CO2 + ionic liquids mixed fluids, showing the relevant role of the strength of anion–cation interactions on fluid volumetric properties and CO2 absorption.

Keywords
Ionic liquids; High-pressure; Carbon dioxide; Solubility; Imidazolium; Molecular dynamics
[Continue reading...]

CO2 Adsorption Studies on Prussian Blue Analogues

F. Karadas, H. El-Faki, E. Deniz, C.T. Yavuz*, S. Aparicio*, M. Atilhan*
Micropor. Mesopor. Mat., 162, 91-97, (2012). [DOI] [pdf] [WOS]



Carbon dioxide (CO2) adsorption capacities of several Prussian Blue (PB) analogues have been studied using the state-of-the-art Rubotherm® sorption apparatus to obtain adsorption and desorption isotherms of these compounds up to 50 bar. The analogues were prepared by simply reacting a [M(CN)6]3- (M= Co, Fe) solution with solutions of M2+ (M= Mn, Fe, Co, Ni, Cu) metal ions. Characterization of the studied samples has been performed by using a combination of powder XRD, TGA, FTIR, and CHN elemental analysis. Adsorption capacities of PB analogues calculated with theoretical calculations, using Monte Carlo approach, have also been compared with the experimental study, and used to discuss the molecular mechanism of adsorption.
[Continue reading...]

High capacity carbon dioxide adsorption by inexpensive covalent organic polymers

H. A. Patel, F. Karadas, A. Canlier, J. Park, E. Deniz, Y. Jung, M. Atilhan*, C. T. Yavuz*
J. Mater. Chem., 22, 8431-8437, (2012). [DOI] [pdf]
With 5616 mg/g, COP-1 sets the new world record for the highest CO2 capture capacity
At infinite selectivity, COP-2 holds the world record in CO2/H2 separation


Efficient CO2 scrubbing without a significant energy penalty remains an outstanding challenge for fossil fuel-burning industry where aqueous amine solutions are still widely used. Porous materials have long been evaluated for next generation CO2 adsorbents. Porous polymers, robust and inexpensive, show promise as feasible materials for the capture of CO2 from warm exhaust fumes. We report the syntheses of porous covalent organic polymers (COPs) with CO2 adsorption capacities of up to 5616 mg/g (measured at high pressures, i.e.200 bar) and industrially relevant temperatures (as warm as 65 oC). COPs are stable in boiling water for at least one week and near infinite CO2/H2 selectivity is observed.

Top five in CO2 capture capacity*:
1. COP-1: 5616 mg/g
2. MOF-210: 2870 mg/g
3. NU-100: 2315 mg/g
4. PPN-4: 2121 mg/g
5. COP-2: 2086 mg/g

*These capacities reflect the highest recorded values, regardless of the conditions. In addition, according to our recent high pressure data on common solids, we believe the rankings won't change much even if the pressures are raised. 



+ This paper was published as is in 16 days after initial receipt

[Continue reading...]

Amidoximes: Promising Candidates for CO2 Capture

S. Zulfiqar, F. Karadas, J. Park, E. Deniz, G. D. Stucky, Y. Jung*, M. Atilhan*, C. T. Yavuz*
Energy Environ. Sci., 4, 4528-4531, (2011). [DOI] [pdf]


Monoethanolamine (MEA) dominates power plant carbon dioxide (CO2) scrubbing processes, though with major disadvantages such as a 8–35% energy penalty. Here we report that structurally comparable amidoximes are promising CO2 capture agents based on RIMP2 electronic structure calculations. This was experimentally verified by the synthesis and testing of representative amidoximes for capture efficiencies at pressures as high as 180 bar. Acetamidoxime, which has the highest percent amidoxime functionality showed the highest CO2 capacity (2.71 mmol/g) when compared to terephthalamidoxime (two amidoximes per molecule) and tetraquinoamidoxime (four amidoximes per molecule). Polyamidoxime surpassed activated charcoal Norit RB3 for CO2 capture per unit surface area. Adsorption isotherms exhibit Type IV behavior and acetamidoxime found to increase CO2 capture with temperature, a less observed anomaly. Porous amidoximes are proposed as valuable alternatives to MEA.

Click here to access via the journal's webpage.

Click here to view the pdf

Click here to download the supplementary information
[Continue reading...]

CO2 Adsorption Studies on Hydroxy Metal Carbonates M(CO3)x(OH)y (M = Zn, Zn Mg, Mg, Mg Cu, Cu, Ni, and Pb) at High Pressures up to 175 bar

F. Karadas, C. T. Yavuz, S. Zulfiqar, S. Aparicio-Martinez, G. D. Stucky, M. Atilhan*
Langmuir, 27 (17), 10642–10647 (2011). [DOI] [pdf]


Carbon dioxide (CO2) adsorption capacities of several hydroxy metal carbonates have been studied using the state-of-the-art Rubotherm sorption apparatus to obtain adsorption and desorption isotherms of these compounds up to 175 bar. The carbonate compounds were prepared by simply reacting a carbonate (CO32-) solution with solutions of Zn2+, Zn2+/Mg2+, Mg2+, Cu2+/Mg2+, Cu2+, Pb2+, and Ni2+ metal ions, resulting in hydroxyzincite, hydromagnesite, mcguinnessite, malachite, nullaginite, and hydrocerussite, respectively. Mineral compositions are calculated by using a combination of powder XRD, TGA, FTIR, and ICP-OES analysis. Adsorption capacities of hydroxy nickel carbonate compound observed from Rubotherm magnetic suspension sorption apparatus has shown highest performance among the other components that were investigated in this work (1.72 mmol CO2/g adsorbent at 175 bar and 316 K).
 
[Continue reading...]
 
Copyright © . ONE Lab - Prof. Cafer T. Yavuz - Posts · Comments
Theme Template by BTDesigner · Powered by Blogger